Blog: Celtic Design Symbols

Pertamina Hulu Energi ONWJ is a global energy company committed to business innovation and environmental leadership. With the significant worldwide growth of PHE ONWJ s oil and gas business, the need arises for an experienced to join the team located in Jakarta.

A highly respected team offering leading edge thinking and works in partnership with the business to deliver the challenging business goals. This also offers the opportunity for flexible working in delivering such goals, values and performance, and is committed to your continual training and career development.


SUBSEA PROJECT ENGINEER (SUB)
Responsibility:
1. Deliver safe and efficient subsea campaigns with focus on project execution activities.
2. Mobilize assurance coordination, liaise with HSE, Marine, Operation, Facility Integrity and Subsea Operations Technical Authority.
3. Manage the provision of CSR and diva representatives.
4. Lead the execution stages of individual campaigns for subsea data acquisition, maintenance, and repair operations.

Requirement:
1. Degree in engineering (offshore engineering) with at least 4-5 years working experience in oil and gas industry.
2. Possess strong knowledge in and be Se to implement HSE handbook of requirement, safety standard, and procedures.
3. Experience in subsea operation.

PROJECT ENGINEER (PE)
Roles (Report to Project Lead)
1. PE for fire and Gas
2. PE for Facility Improvement Projects

Responsibility:
1. Develop and lead the team to deliver results.
2. Work with other project managers/leaders to ensure common (non-dedicated) people resources have clear expectations and time availability; Identify gaps and recognize/provide resources to flit those gaps.
3. Manage contractors in assigned areas to ensure they are brought into the project the appropriate time is provide support and/or support essential, end to ensure compliance with COMPANY safety standards and contracts.
4. Develop coal estimates, monitor and control costs; develop estimated schedule, monitor and control schedule; develop KPIs with teem.
5. Within overall execution strategy provide clear design basis, operating strategy, end scope.
6. Manage the aspects of project regarding changes is the project
7. Monitor end control project schedule and progress, including contracts
8. Ensures alignment to pm-established information management system.
9. Ensure quality by looking for value: Identity the drivers, push back as needed, and address the business needs as wet as the project needs.
10. Manage project risks.
11. Deliver project HSSE / integrity management.

Requirement:
1. Engineering Degrees or Construction Management with at teens 7 years working experience is oil end gas industry.
2. Possess strong knowledge in project management system.
3. Experience in EPC project related to oil and gas industry.
4. Have good leadership skits to lead multidiscipline team in delivering project assigned.

PROJECT LEAD (PL)
Roles (Report to Project Manager):
1. Facility Improvement Projects
2. APN Development
3. Reactivation Projects

Responsibility:
1. Proactively demonstrate high degree of sophisticated decision-making /leadership struts needed to address the complex stakeholder groups end issues associated with lisle level of projects.
2. Effectively manage ongoing relationship with primary contractor - and at related vendors, suppliers to ensure their compliance with project contracting strategy.
3. Build end lad high performance teems; Develop Key Performance Indicators (KPIs)/Performance Plan/ Goats and Objectives for overall project
4. Manage overall Internal and external interfaces for project teem.
5. Develop, Implement and manage an Execution Plan, and lead execution strategies.
6. Develop critical coats and schedule estimates, address all critical project control elements, and. Cost /Schedule / Quality/ Rink Mgmt/ Info Mgmt/ etc.
7. Ensure the hit and proper implementation of execution strategy in FEL.
8. Develop end implement project contracting strategy that meets Execution/Contracting project goals.
9. Ensure the project team s compliance with all reporting requirements and establish delegation of authority within project teem for such reporting.
10. Deliver project in accordance with HOE requirements, and lead project teem personnel towards achieving this goat
11. Focus on business objectives or the big pictures of the project, above and beyond the immediate project goats.
12. Adhere to end promote by leadership the Management Framework leadership standards, including codes of ethical conduct, related to deployment of all business objectives.
13. Manage and define all aspects or risk and changed related to project

Specific Responsibility:
1. Manage development, modification and reactivation project in company.
2. Manage design, engineering procurement and construction activities for project under frisker responsibility
3. Manage team and contractors 111sf assume responsibility for progress and qualify of the project from conceptual/appraisal stage through start-up stage sod performance evaluation.
4. Develop realistic strategy to complete the project within the approved budget and manpower tenets.
5. Provide project Information to management on a timely end regular basis. Advise the management on the status end critical issues involved in the completion of the project managed.
6. Develop and maintain good working relationship within PHE ONWJ and project related government personnel to obtain approval that affect costs and schedule of the facilities.

Requirement:
1. Engineering Degree and /or Construction Management with at least 10 years working experience in Oil and gas Industry.
2. Comprehensive knowledge of project management systems (preferably those who are certified in Project Management for similar).
3. Good experience in EPCI projects in Oil and Gas development.
4. Have a good leadership in leading multidiscipline team to deliver projects.

FIELD ENGINEER (FE)
Responsibility:
1. Support field production facilities especially on operational optimization, unplanned repair, facility debottlenecking advice and supporting day to day production operation.
2. Support TAR Teem in delivering TAR Capital Value Process.
3. Manage at offshore modification by providing project leadership, cost control, planning & planning, technical and; commercial process.
4. Implement MAR/MAHAR/PHA findings and assist Operations to monitor MAR/MAHAR/PHA works.

Requirement:
1. Degree in Engineering preferably in Chemical Engineering with at least 5 years working experience in oil and gas Industry
2. Experience in oil and gas facility design and; operations, production and maintenance.
3. Possess knowledge of standard and codes end engineering principles.
4. Experience in using process engineering software.

PIPELINE SPECIALIST (PS)
Responsibility:
1. Produce annual inspection plane, manage inspection activities, review end interpret inspection results.
2. Manage of pigging operations both of routine pigging and non routine pigging.
3. Assess the effect of any process or equipment changes on pipeline integrity.
4. Assess any deviation from design specifications or parameters prior to continued service.
5. Prepare technical integrity assessment reports which provide an annual fitness for purpose status of each pipeline.

Requirement:
1. Degree in mechanical, civil, process engineering or equivalent with at least 10 years working experience in oil field related to pipeline activities,
2. Possess knowledge of pipeline regulations, industry standards, integrity assessment methods, repair methods, etc.
3. Technical knowledge and work experience in pipeline risk management and analysis.

CHEMICAL and COATING ENGINEER (CCE)
Responsibility:
1. Support the implementation of pipeline integrity management system (PIMS), risk based inspection (RBI), corrosion management system (CMS) program, design phase of the new project or development.
2. Assist operation in selecting proper production chemical to gel best production performance, optimum flow and no scale to environment
3. Provide advisory, guidelines and any appropriate approach related to risk, and other related corrosion strategy.

Requirement:
1. Chemical Engineering Degrees, petroleum and petro gas engineering with at least 10 years working experience in oil and gas industry.
2. Possess strong knowledge and troubleshooting skits is chemical system broil and gas production including corrosion, scale and wax prevention and emulsion treatment.
3. Possess strong knowledge in coating system from prepared on, standard (NACE, SSPI, ISO, etc), proper equipment for both sew and maintenance application.

CONTRACT ENGINEER (CEng)
Responsibility:
1. Develop contract compliance monitoring system hr each contract.
2. Prepare AFE package document and monitor the process.
3. Monitor and liaise with PSCM contract engineer from the tender until the awarding stage.
4. Monitor expenditures and contract expenditures end provide monthly forecast spending breach individual contract at the beginning of the month.

Requirement:
1. Degree in engineering with at least 10 years working experience in all end gee Industry.
2. Possess strong knowledge in contractual end contract development
3. Possess strong knowledge hr BP Migas regulation especially PTK 001.

SENIOR PROCESS SAFETY ENGINEER (SPR)
Responsibility:
1. Develop and be responsible for process safety design of project end operations.
2. Responsible for the development of process safety management and activities for both existing operation end new projects.
3. Responsible for and facilitate risk/safety studies (it HAZOP) including reviewing end develop quantitative risk analysis.
4. Develop contractors scope of work, provide supervision end review contractor deliverables related with process safety engineering end ensure the design comply with PHE specification/code standard Sir project during appraisals end execution (EPCI).

Requirement:
1. Bachelor Degree Engineering, preferably chemical or petrochemical engineering with at least 12 years working experience in oil and gee Industry.
2. Possess strong knowledge in oil and gas facility design and operation, standard and codes, engineering principle, arid using process safety engineering software
3. Possess strong knowledge in process safety design for project end operations life cycle.
4. Possess strong knowledge in process safety end risk management both qualitatively and quantitatively.
5. Show expertise to read HAZOP, HAZID and LOPA studies and other risk assessment methods.

SENIOR PIPELINE ENGINEER (SPE)
Responsibility:
1. Development of specifications, design, procurement, fabrication, installation, testing, and commissioning of subsea export pipeline and production flowline systems, and end terminations.
2. Preliminary design hr optimum routing, integrity, installation and stability as wells interface and risk management for at project phases.
3. Manage interfaces with project team, FEED & execution contractors and ensure compliance whit internal standards, industry guidelines and applications government codes and regulations.
4. Provide quality assurance function for all contractor pipeline engineering work hr order to achieve the required standard.
5. Provide detailed pipeline engineering study hr project of alt size.
6. Coordinate project pipeline engineering end interface with other function

Requirement:
1. Degree in Mechanical Engineering or ocean engineering with at least 12 years working experience in oil and gas project engineering.
2. Capable of serving as Pipeline Lead on projects, including generation of detailed functional specifications and bid packages, perform bid analysis, review of design and test documentation, interface management, QA/QC end testing oversight, integration testing, pipeline installation and commissioning.
3. Demonstrated ability to drive incident free HSE radium.
4. Capable of managing contracts; monitoring and approving contractors plans, procedures, end work output knowledge of contract management procedures.
5. Demonstrated experience in selecting/managing large contracts; monitoring and approving contractor s plane, procedures, and work output. Able to anticipate and mitigate both internal and external technical /schedule risk.
6. Has good knowledge of economic drivers (including full field life cycle costs) end sees this knowledge to make or Influence decisions.
7. Demonstrated capability of working as part of a multifunctional asset teem, including vendor management (communication, coat schedule, MOC, etc.).
8. Possess strong knowledge in oil and gas facilities, standard, codes in pipeline engineering.
9. Good experience in pipeline repair engineering.

SENIOR STRUCTURE ENGINEER (SSE)
Responsibility:
1. Coordinate the implementation of structural integrity management programs on company facilities.
2. Provide structural engineering consultancy in design, analysis, fabrication and installation of a new development or modification is existing structures.
3. Provide assurance that company specifications, applicable codes and standards for structures are compiled.
4. Provide structural engineering consultancy hr deity operations activities that have impact on structures.
5. Perform rink assessment end analysis on existing structures due is anomalies.
6. Comply with the Company safety, quality end environmental requirements.

Requirement:
1. Civil Engineering Degrees or Structural Engineering Degrees with at least 10 years working experience in oil and gas industry.
2. Good knowledge of engineering principles, codes, and standards.
3. Possess strong knowledge in structural analysis software i.e SACS.
4. Basic understanding of HSE theory arid applications.
5. Good knowledge of inspection, maintenance, and repair methods.

SENIOR ELECTRICAL ENGINEER (SLE)
Responsibility:
1. Provide electrical engineering advices and recommendations for continuous electrical performance Improvements.
2. Develop end improve electrical engineering requirements and standards which comply with industrial standard, i.e: NEC, IEC, NFPA, IEEE, ATEX, API ETC.
3. Review engineering documents end project deliverables misted with electrical engineering end ensure the design comply with company specifications/code standards.
4. Provide inputs, recommendations and assurances on the comprehensive electrical engineering integrity throughout all company fields..

Requirement:
1. Degree in electrical engineering with at least 10 years working experience in oil and gas Industry.
2. Possess strong knowledge in oil & gas facilities design & operations, also master in electrical engineering standard and codes.
3. Strong knowledge in power system analyze and design, transmission and distribution, fire & explosion protective systems also hazardous area classification
4. Familiar with electrical engineering software and tools La: ETAP, EDSA, CANECO, CALCULUX, ExSILintia ETC.

SENIOR PROJECT QA/QC (PQA/QC) & QA/QC ENGINEER (QA/QC Eng)
Responsibility:
1. Develop and Implement company quality manual/inspection test plan is meet quality Industry standards for oil and gas industry.
2. Develop quality audit to ensure quality manual is followed.
3. Review technical/engineering deliverable to ensure the quality criteria is fulfilled.
4. Review and approve contractor project quality system/plan.

Requirement:
1. Degree in mechanical or structural or other related engineering with at leant 10 years working experience (PQA/QC) and 5 years working experience ) QA/QC Eng) in oil and gas industry.
2. Knowledge in quality Management System for oil and gas Industry and 1S09000 is preferred.
3. Experienced in quality System Audit hr Refinery or Petrochemical Plant works.
4. Review with industrial code/standard for oil and gas Industry.
5. Good leadership and has an excellent communications skill amongst horizontal and vertical lines in the specifications
6. Having a certification on QMS Auditor and/or one of equipment, welding is a plus.

FABRICATION S MODIFICATION ENGINEER (FME)
Responsibility:
1. Plan and coordinate site survey related with measurement & constructability that era to be carried out by fabrication & modification team and contractor as well.
2. Track and monitor the site survey implementations and cream the progress comply with plan and requirement
3. Review all the sketches made by surveyor and converted into electronic drawing (CAD).
4. Review drawing and material take off and ensure them comply with company specifications.
5. Keep and maintain engineering database raided with engineering standards, code and practices and control & manage fabrication and modification drawing database.

Requirement:
1. Degree in mechanical, civil or metallurgical engineering with at cent 10 years working onshore and offshore work experience in oil and gas industry.
2. Familiar with applicable codes, standards, regulation pertaining to welding/construction/fabrication of vessel, piping, structural, and pipeline.

VALVE MAINTENANCE ENGINEER (VME)
Responsibility:
1. Ensuring quality assurance of valve maintenance services in accordance with company s standards, procedures and industry standards.
2. Improving quality service in valve maintenance area to reduce unplanned equipment problems end sustain company production and operation integrity.
3. Develop maintenance technical documents and procedure and working in the field to ensure timely execution of the valve and instrumentation maintenance services as per recommendations, RCFA analysis end company s Generic Maintenance Strategy (GMS).

Requirement:
1. Degree in mechanical engineering withal least of 7 years working experience in quality assurance and maintenance engineering.
2. Possess strong knowledge in the operation and maintenance of valve practices including its workshop repair.
3. Engineering design experience and working knowledge of valves, process and piping.
4. Familiar with various valve manufacturers in Oil and Gas Industry.

ELECTRICAL MAINTENANCE ENGINEER (EME)
Responsibility:
1. Ensure quality assurance of electrical power generation, distribution, motors and other Ex electrical equipments maintenance in accordance with company s standards, procedures end industry standards.
2. Improve quality service in electrical area to reduce unplanned equipment problems end sustain company production and operation integrity through consistent review of maintenance data.
3. Develop maintenance technical documents end procedures and to ensure timely execution of the electrical equipment maintenance services as per recommendations, RCFA analysis end company s Generic Maintenance Strategy (GMS).

Requirement:
1. Degree in electrical engineering with at least 7 years working experience quality assurance end maintenance engineering.
2. Engineering design experience and working knowledge of power generation, distribution, protections in hazardous area.
3. Possess strong knowledge in the maintenance at electrical generators, distributions, protection, motor and electrical equipments.
4. Familiar with various electrical equipment manufacturers in Oil and Gas Industry.

MECHANICAL MAINTENANCE ENGINEER (MME)
Responsibility:
1. Ensure quality assurance of pumps, compressors, diesel/gas engines and safety equipment maintenance in accordance with COMPANY standards, procedures end industry standard.
2. Improve quality service in mechanical area is reduce unplanned equipment problems and sustain company production and operation integrity through consistent review of maintenance data.

Requirement:
1. Degree in mechanical engineering with at least 1 years working experience in quality assurance end maintenance engineering.
2. Engineering design experience end working knowledge of mechanical equipment end general knowledge about - equipment
3. Possess strong knowledge is the maintenance of pumps, compressors and diesel/gas engines.

You will be a self starter with strong Interpersonal and team working skills and will be fluent In English end Bahasa Indonesia. Forward your complete resume and recent photograph with interested position in your email address to:

recruitment.pheonwj@pertamina.com

Applications close 18 march 2010.

Ouch! You hit a "404 page." What does that mean? Either I've posted a bad link, or you typed the wrong address and wound up here. Here are some options...

• Hit the "back" button on your browser.
• Head back to the home page.
• Try searching using the search form.

By the way, if it was my fault, please contact me to let me know. Download Link
High Frequency Electromagnetic Dosimetry (2009)
by: David A. Sanchez-Hernandez
RF Front-End: World Class Designs, 1st Edition (2009)
by: Janine Love (Editor)
Real-Time Stability Assessment in Modern Power System Control Centers (2009)
by: S. C. Savulescu
Micro Fuel Cells: Principles and Applications (2009)
by: Tim Zhao3
Technology, Design and Process Innovation in the Built Environment (2009)
by: Peter Newton, Keith
Monte Carlo Methods for Electromagnetics (2009)
by: Matthew N.O. Sadiku
Ultraviolet Light in Food Technology: Principles and Applications (2009)
by: Tatiana Koutchma, Larry J. Forney, Carmen I. Moraru
Design of Rotating Electrical Machines (2009)
by: Juha Pyrhonen
Bebop to the Boolean Boogie, Third Edition: An Unconventional Guide to Electronics (2009)
by: Clive Maxfield
CVD Diamond for Electronic Devices and Sensors (2009)
by: Ricardo S. Sussmann
Transactions on High-Performance Embedded Architectures and Compilers II, 1st Edition (2009)
by: Per Stenström (Editor)
Professional ADO.NET 3.5 with LINQ and the Entity Framework (2009)
by: Roger Jennings
Cocoa Programming for Mac OS X For Dummies, 2nd Edition (2009)
by: Erick Tejkowski
Op Amps for Everyone, 3rd Edition (2009)
by: Bruce Carter, Ron Mancini
Complete PCB Design Using OrCAD Capture and PCB Editor (2009)
by: Kraig Mitzner
Circuit Simulation with SPICE OPUS: Theory and Practice (2009)
by: Tadej Tuma, Arpad Burmen
Advanced Power Rectifier Concept (2009)
by: B. Jayant Baliga
Electronic Device Architectures for the Nano-CMOS Era: From Ultimate CMOS Scaling To Beyond CMOS Devices (2008)
by: Simon Deleonibus (Editor)
McGraw-Hill National Electrical Code 2008 Handbook, 26th Edition (2008)
by: Brian McPartland, Joseph McPartland
Contributions to Simulation Speed-up (2008)
by: Eugen Lamers
Linear Feedback Control: Analysis and Design with MATLAB (2008)
by: Dingyu Xue,YangQuan Chen,Derek P. Atherton
DarkBASIC Programming for the Absolute Beginner (2008)
by: Jerry Lee Ford
Core Animation for Mac OS X and the iPhone: Creating Compelling Dynamic User (2008)
by: Bill Dudney
Blogger: Beyond the Basics: Customize and promote your blog with original templates, analytics, advertising, and SEO (2008)
by: Lee Jordan
CRM as a Rapid Development Platform (2008)
by: David Yack
Electric power generation, transmission and efficiency (2008)
by: Clement M. Lefebvre
Electronic Tribes: The Virtual Worlds of Geeks, Gamers, Shamans, and Scammers (2008)
by: Tyrone L. Adams, Stephen A. Smith
Electric Power Distribution Reliability, 2nd Edition (2008)
by: Richard E. Brown, H. Lee Willis
Electrical Engineering 101, Second Edition: Everything You Should Have Learned in School...but Probably Didn't (2008)
by: Darren Ashby
Three-dimensional Integrated Circuit Design (2008)
by: Vasilis F. Pavlidis, Eby G. Friedman
Basic Electrical Technology (2008)
by: IIT Kharagpur
Introduction to Electrical Power Systems (2008)
by: Mohamed E. El-Hawary
Classical Circuit Theory (2008)
by: Omar Wing
Fundamentals of Electric Propulsion: Ion and Hall Thrusters (2008)
by: Dan M. Goebel
Power System Engineering: Planning, Design, and Operation of Power Systems and Equipment (2008)
by: Juergen Schlabbach
Reliability of MEMS: Testing of Materials and Devices (2008)
by: Osamu Tabata
Power System Relaying (2008)
by: Stanley H. Horowitz, Arun G. Phadke
Switch-Mode Power Supplies Spice Simulations and Practical Designs (2008)
by: Christophe P. Basso
Linear Circuit Design Handbook, 2nd edition (2008)
by: Hank Zumbahlen (Editor)
Electrical Transport in Nanoscale Systems (2008)
by: Massimiliano Di Ventra
Basic NEC with Broadcast Applications (2008)
by: J.L. Smith
Analog Circuits (World Class Designs) (2008)
by: Robert Pease (Editor)
Electronics System Design Techniques for Safety Critical Applications (2008)
by: Luca Sterpone
MSP430 Microcontroller Basics (2008)
by: John H. Davies
Evaluation of the Multifunction Phased Array Radar Planning Process (2008)
by: National Academy of Sciences
Design Computing and Cognition: Proceedings of the Third International Conference on Design Computing and Cognition (2008)
by: Johns S. Gero and Ashok K. Goel (Editor)
Circuit Cellar Magazine (2008)
by: Circuit Cellar
Digital Television - Satellite, Cable, Terrestrial - IPTV, Mobile TV in the DVB Framework (2008)
by: Herve Benoit
FPGA-based Implementation of Signal Processing Systems (2008)
by: Roger Woods
Advanced Electrical Installation Work, 5th Edition (2008)
by: Trevor Linsley
American Electricians' Handbook 15th edition (2008)
by: Terrell Croft, Wilford I. Summers, and Frederic Hartwell
Guide to the Wiring Regulations: 17th Edition IEE Wiring Regulations (2008)
by: Darrell Locke
Fundamental Electrical and Electronic Principles, 3rd Edition (2008)
by: C R Robertson
All New Electronics Self-Teaching Guide (2008)
by: Harry Kybett
Basic Electrical Installation Work, 5th Edition (2008)
by: Trevor Linsley
Handbook of Power Quality (2008)
by: Angelo Baggini
Latchup (2008)
by: Steven H. Voldman
Audio Engineering: Know It All, Volume 1 (2008)
by: Douglas Self
Essentials of UWB: The Cambridge Wireless Essentials Series (2008)
by: Stephen Wood, Roberto Aiello
Maximizing Energy Savings and Minimizing Energy Costs (2008)
by: John M. Studebaker
Electrical Power Systems Technology, 3rd Edition (2008)
by: Dale R. Patrick
Leading-Edge Electric Power Research (2008)
by: Cian M. O'Sullivan
Electrical Power Equipment Maintenance and Testing, 2nd Edition (2008)
by: Paul Gill
Advanced Computer Techniques in Applied Electromagnetics (2008)
by: Slawomir Wiak, Andrzej Krawczyk, Ivo Dolezel
Flexible Power Transmission: The HVDC Options (2007)
by: Jos Arrillaga, Y. H. Liu, Neville R. Watson
The ULTIMATE Tesla Coil Design and Construction Guide, 1st Edition (2007)
by: Mitch Tilbury
Electric Power System Basics for the Nonelectrical Professional (2007)
by: Steven W. Blume
Handbook of Silicon Wafer Cleaning Technology (2007)
by: Karen A. Reinhardt, Werner Kern
Maintaining Mission Critical Systems in a 24/7 Environment (2007)
by: Peter M. Curtis
Switchmode RF Power Amplifiers (2007)
by: Andrei Grebennikov, Nathan O. Sokal
Fundamentals of Instrumentation and Measurement (2007)
by: Dominique Placko (Editor)
Programming for the Absolute Beginner (2007)
by: Jerry Lee Ford Jr.
Image Processing for Remote Sensing (2007)
by: C.H. Chen
Electrician's Troubleshooting and Testing Pocket Guide, 3rd Edition (2007)
by: Brooke Stauffer, John E. Traister
ESL Design and Verification: A Prescription for Electronic System Level Methodology (2007)
by: Grant Martin
COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering - Vol. 26 (2007)
by: Professor Andrzej Demenko (Guest Editor)
Power Sources and Supplies (2007)
by: Marty Brown
Printed Circuits Handbook (2007)
by: Clyde F. Coombs
Quasi-Orthogonal Space-Time Block Code (2007)
by: Chau Yuen
Electromagnetics and Antenna Optimization using Taguchi's Method (2007)
by: Wei-Chung Weng
VHDL 2008: Just the New Stuff (2007)
by: Peter J. Ashenden
CMOS Multichannel Single-Chip Receivers for Multi-Gigabit Optical Data Communications (2007)
by: Paul Muller
Reflectarray Antennas (2007)
by: John Huang
The Method of Moments in Electromagnetics (2007)
by: Walton C. Gibson
Practical Electronics Handbook, Sixth Edition (2007)
by: Ian Sinclair, John Dunton
Video Demystified, Fifth Edition: A Handbook for the Digital Engineer (2007)
by: Keith Jack
An Analog Electronics Companion: Basic Circuit Design for Engineers and Scientists (2007)
by: Scott Hamilton
DPSM for Modeling Engineering Problems (2007)
by: Dominique Placko
Antenna Engineering Handbook, Fourth Edition (2007)
by: John Volakis
Electromechanical Devices & Components Illustrated Sourcebook (2007)
by: Brian Elliott
Fuel Cell Electronics Packaging (2007)
by: Ken Kuang
Advanced CMOS Cell Design (2007)
by: Etienne Sicard, Sonia Delmas Bendhia
Advanced Memory Optimization Techniques for Low-Power Embedded Processors (2007)
by: Manish Verma, Peter Marwedel
Electrical and Electronic Principles and Technology, 3rd Edition (2007)
by: John Bird
How Video Works (2007)
Marcus Weise, Diana Weynand
Introduction To Electrical Installation Work: Compulsory Units For The 2330 Certificate In Electrotechnical Technology Level 2 (2007)
by: Linsley, Trevor
Power Systems Stability & Control (2007)
by: Leonard L. Grigsby (editor)
Digital Electronics - Principles, Devices & Applications (2007)
by: Anil K. Maini
Powerboater's Guide to Electrical Systems, 2nd Edition (2007)
by: Ed Sherman
FACTS: Controllers in Power Transmission and Distribution (2007)
by: K. R. Padiyar
Electronics Sensors for the Evil Genius: 54 Electrifying Projects, 1st Edition (2006)
by: Thomas Petruzzellis
The VLSI Handbook, 2nd Edition (2006)
by: Wai-Kai Chen (Editor)
Realization Theory and Design of Digital Images, 1st Edition (2006)
by: Yasumichi Hasegawa, Tatsuo Suzuki
Telecom For Dummies (2006)
by: Stephen P. Olejniczak
Electrical Distribution Engineering, 3rd Edition (2006)
by: Anthony J. Pansini
A Textbook of Electrical Technology: Vol 2. AC and DC Machines (2006)
by: B.L. Theraja, A.K. Theraja
Digital Principles & Switching Theory (2006)
by: A.K. Singh
Computational Electronics (Synthesis Lectures on Computational Electromagnetics) (2006)
by: Stephen M. Goodnick
Teach Yourself Electricity and Electronics, Fourth Edition (2006)
by: Stan Gibilisco
STEP 7 in 7 Steps - A Practical Guide to Implementing S7-300/S7-400 Programmable Logic Controllers (2006)
by: Clarence T. Jones
Abstraction Refinement for Large Scale Model Checking (2006)
by: Chao Wang, Gary D. Hachtel, Fabio Somenzi
Electronics, Power Electronics, Optoelectronics, Microwaves, Electromagnetics, and Radar (2006)
by: Richard C. Dorf (Editor)
Broadband Planar Antennas: Design and Applications (2006)
by: Zhi Ning Chen
A Designer's Guide to Instrumentation Amplifiers, 3rd Edition (2006)
by: Charles Kitchin and Lew Counts
Electrical Contacts: Fundamentals, Applications and Technology (2006)
by: Milenko Braunovic, Nikolai K. Myshkin, Valery V. Konchits
Harmonics and Power Systems (2006)
by: Francisco C. De La Rosa
History of Semiconductor Engineering (2006)
by: Bo Lojek
Fundamentals Of Power Electronics With MATLAB (2006)
by: Randall Shaffer
Advanced Design Techniques for RF Power Amplifiers (2006)
by: Anna Rudiakova
Power Electronics Handbook, 2nd Edition: Devices, Circuits and Applications (2006)
by: Muhammad H. Rashid
Electric Drives and Electromechanical Systems (2006)
by: Richard Crowder
Power Plant Engineering (New Age International) (2006)
A.K. Raja, Amit Prakash
Electrical Inspection Notes: Up to Code (2005)
by: Gil Taylor
Integrated Circuit Test Engineering: Modern Techniques (2005)
by: Ian A. Grout
Digital Logic and Microprocessor Design with VHDL (2005)
by: Enoch O. Hwang
Power Generation Technologies (2005)
by: Paul Breeze
Foundations of Analog and Digital Electronic Circuits (2005)
by: Anant Agarwal
Synchronous Generators (2005)
by: Ion Boldea
Comprehensive Dictionary of Electrical Engineering, Second Edition (2005)
by: Philip A. Laplante (Editor)
Electric Motors and Drives: Fundamentals, Types and Applications (2005)
by: Austin Hughes
Design of Electrical Services for Buildings 4th Edition (2005)
by: Barrie Rigby
Distribution Reliability and Power Quality (2005)
by: Thomas Allen Short
Principles And Applications Of Electrical Engineering (2004)
by: Giorgio Rizzoni
HDTV For Dummies (2004)
by: Danny Briere, Pat Hurley
Automobile Electrical and Electronic Systems (2004)
by: Tom Denton
Testing for EMC Compliance: Approaches and Techniques (2004)
by: Mark I. Montrose, Edward M. Nakauchi
Transformer Engineering (2004)
by: S.V.Kulkarni & S.A.Khaparde
HVDC and FACTS Controllers: Applications of Static Converters in Power Systems, 1st Edition (2004)
by: Vijay K. Sood
16th IEE Wiring Regulations: Design and Verification of Electrical Installations (2004)
by: Brian Scaddan
Dedicated Digital Processors: Methods in Hardware/Software Co-Design (2004)
by: F. Mayer-Lindenberg
Fundamentals of Digital Logic with VHDL Design (2004)
by: Stephen Brown
Introduction to Digital Professional Mobile Radio (2004)
by: Hans-Peter A. Ketterling
Feedback Linearization of RF Power Amplifiers (2004)
by: J.L. Dawson
A Platform-Centric Approach to System-on-Chip (SOC) Design (2004)
by: Vijay K. Madisetti, Chonlameth Arpikanondt
An Introduction to Radio Frequency Engineering (2004)
by: Christopher Coleman
Instrumentation And Control Systems Documentation (2004)
by: Meier, Frederick A.; Meier, Clifford A.
Design of Linear RF Outphasing Power Amplifiers (2003)
by: Xuejun Zhang
Practical Handbook of Photovoltaics: Fundamentals and Applications (2003)
by: Tom Markvart & Luis Castafier (Editor)
Insulated Gate Bipolar Transistor IGBT: Theory and Design (2003)
by: Vinod Kumar Khanna
Electrical Power Cable Engineering: Second Edition (2003)
by: William A. Thue (Editor)
An Introduction to Parametric Digital Filters and Oscillators (2003)
by: Mikhail Cherniakov
Scalar Waves (2003)
by: Konstantin Meyl
Electrical Pocket Book, 23rd Edition (2003)
by: Martin Heathcote
Building Solutions with the Microsoft .NET Compact Framework: Architecture and Best Practices for Mobile Development (2003)
by: Dan Fox
Practical Interfacing in the Laboratory: Using a PC for Instrumentation, Data Analysis and Control (2003)
by: Stephen E. Derenzo
Instrumentation Reference Book, 3rd Edition (2003)
by: Walt Boyes (Editor)
Solid-State Lasers: A Graduate Text (2003)
by: Walter Koechner, Michael Bass
Nonlinear Signal and Image Processing: Theory, Methods, and Applications (2003)
by: Kenneth E. Barner, Gonzalo R. Arce (Editors)
Dielectrics in Electric Fields (2003)
by: Gorur G. Raju
Logic and Computer Design Fundamentals, 3rd Edition (2003)
by: M. Morris Mano
Electric Power Distribution Handbook (2003)
by: Thomas Allen Short
Digital integrated circuits 2nd edition (2003)
by: Jan M. Rabaey
CRC Handbook of Engineering Tables (2003)
by: Richard C. Dorf
Circuit Analysis I with MATLAB Applications (2003)
by: Steven T. Karris
High Temperature Solid Oxide Fuel Cells; Fundamentals, Design and Applications (2003)
by: Subhash C Singhal and Kevin Kendall (Edited)
Draw the Lightning Down: Benjamin Franklin and Electrical Technology in the Age of Enlightenment (2003)
by: Michael B. Schiffer
Wireless Sensor Network Designs (2003)
by: Anna Hac
Interference Analysis and Reduction for Wireless Systems (2003)
by: Peter Stavroulakis
Electronic Materials and Processes Handbook (2003)
by: Charles Harper
Practical Reliability Of Electronic Equipment And Products (2002)
by: Hnatek, Eugene R.
Applications of Silicon-Germanium Heterostructure Devices (2002)
by: C.K Maiti
Mixed Analog-digital VLSI Devices and Technology (2002)
by: Yannis Tsividis
Power Transformers Principles & Application (2002)
by: John J. Winders
Photo Reactive Organic Thin Films (2002)
by: Zouheir Sekkat and Wolfgang Knoll (Editor)
Sustainability at the Cutting Edge: Emerging Technologies for Low Energy Buildings (2002)
by: Peter F. Smith
Thyristor-Based FACTS Controllers for Electrical Transmission Systems (2002)
by: R. Mohan Mathur, Rajiv K. Varma
Electric Vehicle Battery Systems (2002)
by: S. Dhameja
Essentials of Electronic Testing (2002)
by: Michael L. Bushnell, Wishavani D. Agrawal
VHDL: Programming By Example (2002)
by: Douglas L. Perry
Semiconductor Optical Amplifiers (2002)
by: Michael J. Connelly
Permanent Magnet Motor Technology (2002)
by: Jacek & Mitchel
A Practical Guide to the Wiring Regulations (2002)
by: Geoffrey Stokes
Photonics Essentials: An Introduction with Experiments (2002)
by: Thomas P. Pearsall
Newnes Guide to Digital TV (2002)
by: Richard Brice
Radio Frequency Transistors: Principles and Practical Applications (2001)
by: Norman Dye, Helge Granberg
Foundations of Interconnect and Microstrip Design (2001)
by: T. C. Edwards, M. B. Steer
Handbook of Energy Engineering 5th Edition (2001)
by: Albert Thumann
Understand Electronics, 2nd Edition (2001)
by: Owen Bishop
Principles of Electronic Materials and Devices, 2nd Edition (2001)
by: Safa O. Kasap
Restructured Electrical Power Systems (2001)
by: Muwaffaq Alomoush, Mohammad Shahidehpour
Handbook of Antennas in Wireless Communications (2001)
by: Lal Chand Godara (Editor)
Fundamentals of Optics, 4th Edtion (2001)
by: Francis Jenkins, Harvey White, Francis Jenkins, Harvey White
Permanent Magnet & Electromechanical Devices: Materials, Analysis, and Applications (2001)
by: Edward P. Furlani
Microwave Circuit Design Using Linear and Nonlinear Techniques (2001)
by: George D. Vendelin, Anthony M. Pavio, Ulrich L. Rohde
Design with Operational Amplifiers and Analog Integrated Circuits (2001)
by: Sergio Franco
Handbook of advanced electronic and photonic materials and devices (2001)
by: Hari Singh Nalwa
Standard Handbook of Audio and Radio Engineering (2001)
by: Jerry Whitaker
Sensors and Transducers, 3rd Edition (2001)
by: Ian R. Sinclair
Electromagnetic Analysis Using Transmission Line Variables (2001)
by: Maurice Weiner
Reflow Soldering Processes and Troubleshooting: SMT, BGA, CSP and Flip Chip Technologies (2001)
by: Ning-Cheng Lee
The Mechanical Systems Design Handbook: Modeling, Measurement, And Control (2001)
by: Nwokah, Osita D.
Electronics and Communications for Scientists and Engineers (2001)
by: Martin Plonus
Protel 99 SE Designer's Handbook (2001)
by: Altium Limited
High Frequency and Microwave Engineering (2001)
by: E. Da Silva
Getting the Most Out of Vacuum Tubes (2000)
by: Tomer
Battery Reference Book, Third Edition (2000)
by: T.R. Crompton
High Power Audio Amplifier Costruction Manual 50 To 500 Watt (2000)
by: G. Randy Slone
Electrical Engineering Dictonary (2000)
by: Phillip Laplante
Control of Induction Motors (2000)
by: David J. Irwin (Editor)
Refrigeration and Air Conditioning 3rd Edition (2000)
by: A R Trott
Industrial Electronics for Engineers, Chemists, and Technicians: With Optional Lab Experiments (2000)
Daniel J. Shanefield
The Electric Power Engineering Handbook (2000)
by: Leonard L. Grigsby
Soldering in Electronics Assembly (1999)
by: Mike Judd
Sams Teach Yourself Java 2 in 24 Hours (1999)
by: Rogers Cadenhead
Surviving the SOC Revolution - A Guide to Platform-Based Design (1999)
by: Henry Chang
Design for AT-Speed Test, Diagnosis and Measurement (1999)
by: Benoit Nadeau-Dostie
CMOS IC Layout: Concepts, Methodologies, and Tools (1999)
by: Dan Clein
EMC for Systems and Installations (1999)
by: Tim Williams
Solid State Electronic Devices, 5th Edition (1999)
by: Ben Streetman
Analysis and Design of Integrated Circuit-Antenna Modules (1999)
by: K. C. Gupta, Peter S. Hall (Editor)
Erbium-Doped Fiber Amplifiers: Fundamentals and Technology (1999)
by: Philippe C. Becker, N. Anders Olsson, Jay R. Simpson
Analogue and Digital Communication Techniques (1999)
by: Graham Smillie
Protection Of Industrial Power Systems, Second Edition (1998)
by: Davies, T.
Mobile Robots: Inspiration to Implementation, 2nd Edition (1998)
by: Joseph L. Jones, Anita M. Flynn, Bruce A. Seiger
The J & P Transformer Book, Twelfth Edition (1998)
by: Martin J. Heathcote
Radio Antennas and Propagation: Radio Engineering Fundamentals (1998)
by: William Gosling
Practical Transformer Handbook: for Electronics, Radio and Communications Engineers (1998)
by: Irving Gottlieb
Introduction to Power Electronics (1998)
by: Deniw Fewson
Wireless Communications Design Handbook, Vol. 2: Terrestrial and Mobile Interference (1998)
by: Reinaldo Perez
Wireless Communications: Signal Processing Perspectives (1998)
by: H. Vincent Poor - Gregory W. Wornell
Microwave Transistor Amplifiers: Analysis and Design (2nd Edition) (1996)
by: Guillermo Gonzalez
Semiconductor Device Fundamentals, 2nd Edition (1996)
by: Robert F. Pierret
Algorithms for VLSI Physical Design Automation (1995)
by: Naveed Sherwani
Power Plant Engineering (1995)
by: Larry Drbal, Kayla Westra, Pat Boston (Editors)
Introduction to Electric Circuits (1995)
by: Ray Powell
Introduction to Medical Electronics Applications (1995)
by: D. Jennings, A. Flint, B.C.H. firton and L.D.M. Nokes
Schaum's Outline of Digital Principles, Third Edition (1994)
by: Roger L. Tokheim
Solutions Manual for Fundamentals of Engineering Electromagnetics (1993)
by: David K. Cheng
Speckle Metrology (1993)
by: Rajpal S. Sirohi
Electromagnetic Compatibility Principles and Applications (1991)
by: David A. Weston
Computation Structures (1989)
by: Stephen A. Ward
Intuitive CMOS Electronics (1988)
by: Thomas M. Frederiksen
Antennas, 2nd Edition (1988)
by: John Daniel Kraus
Introduction to Solid-State Power Electronics (1977)
by: William Newell
Know your oscilloscope (1963)
by: Paul C. Smith
Troubleshooting with the Oscilloscope (1962)
by: Robert G. MIddleton
Oscilloscope Techniques (1958)
by: Alfred Haas